X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.

X-431 GIII X-PROG 3 Highlights:

1. All-in-One Key Programmer. Integrates Multiple Function Models.
2. Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
3. Compatible with Multiple X-431 Series Diagnostic Tablet: X431 Pros Star, Pros Elite, PRO ELITE, Pro3 V5.0 (V+ V5.0), PROS V5.0,  Pro3S+ V5.0, LAUNCH PRO5, PRO TT, PRO3 ACE, PRO DYNO, PRO3 APEX, PAD II, PAD V, PAD VII, PAD V (PAD V ELITE), PAD VII ELITE, Immo PAD, Immo Pro, Immo Plus, Immo Elite, X-DIAG Pro3 etc.
*X431 V/ V+ 1.0-4.0/ Pros v1.0 with X-PROG3 CAN NOT ADD extra IMMO software. Please check here for more information.
*Only the NEWEST version can support with X-PROG3 ADD extra IMMO software, such as X431 Pro3 V5.0 (V+ V5.0), PROS V5.0,  Pro3S+ V5.0, X431 V V5.0 and etc.

4. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
5. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
6. Enables Reading/ Writing EEPROM, On-Board MCU and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
7. For key programming, Xprog-3 is not for keys, it is mainly for cloning data. IMMO software is required for key programming.The IMMO LICENSE please check here.
8. NEW!!! Update VAG MQB NEC35XX D70F3524, D70F3525, D70F3526, D70F3529, D70F3532, D70F3537 add key & all keys lost
9. NOTE: If you try to update key programming software and firmware on Launch X431 IMMO Plus/ Elite/ PAD V/ PAD VII, you must connect this key programmer with tablet, otherwise it will give error device no response.
10. – To use MCU3 Adapter, you must have Launch Xprog-3 GIII Adapter, if you do not have Xprog-3 GIII, you can buy this bundle to save your money.
– The mcu3 adapter is not included with the xprog3.

Note:
*X431 Pro5 SmartLink (new) has a Type-C connector that can directly connect with X431 X-Prog3 to perform ECU & TCU clone function.
*X431 Pro5 SmartBox (old) doesn’t have a Type-C connector, but you can buy an extra OTG USB Micro to USB-C Adapter to work with X-431 X-Prog3 to perform ECU & TCU clone function.
*X-PROG3 will connect PAD VII/PAD V/Pro5 and IMMO series (IMMO Pro/IMMO Elite/IMMO Plus) via USB, for other X431 tablets, only Bluetooth or WiFi connection.
*To clone ECU or TCU with X-PROG3, you need PAD series or IMMO tablet series tools. CRP919 BT/ X431 V/V+/Pros v1.0 with X-PROG3 cannot do ECU/TCU cloning.

Launch X-PROG 3 Main Functions:

• Supports MQB.
• Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
• Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
• Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
• Update VAG MQB NEC35XX D70F3524, D70F3525, D70F3526, D70F3529, D70F3532, D70F3537 add key & all keys lost NEW!!!
• X-PROG 3 enables reading and writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
• X-PROG 3 enables anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.
• More than just key programming — The LAUNCH XPROG 3 also supports advanced coding/programming functions: – ECU replacemetn for 4TH Generation Audi (0AW/0B5) gearboxs. – Reading, writing & cloning of the ECU for 4TH Generation VW UDS engines. – BMW E chassis 8HP gearbox ECU program wiping,.etc.

Extended function (need to purchase extra):
– Use with MCU3 adapter to do Benz All Keys Lost and ECU TCU Reading.
– Use with Launch RH850 Adapter for Renesas Encrypted RH850 MCU Read and Write
– Use with Launch ECU Bench Adapter for Renesas Encrypted RH850 MCU Read and Write
– Use with X431X-PROG3 PC Adaptor Support Read/Write ECUs Data And Engine Data Validation
– Use with Gearbox Cloning adapters Faster connection without mcu3 adapter or a bundle of adapters.
– Use with Toyota emulator key: can collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip.
– Use with Toyota All Keys Lost Adapter Kit Include with CH-01 H Non-Smart Key, CH-02 24-PIN and CH-03 27-PIN Adapters
1) Toyota 27 pin smart key AKL cable Support For Toyota 4A, 8A-A9, and 8A-AA smart keys all lost (dismantle and read the immobilizer box)
2) Toyota H non-smart key AKL cable Program Toyota 8A mechanical keys all lost. The applicable models are: 2014 onwards Corolla, Levin, Camry, Highlander, and Prado
3) Toyota 24-pin smart key AKL cable  Support Dismantle And Read The IMMO Box for F15/F18 smart keys, 2019 onwards such as Highlander, Alphard, and Vellfire, equipped with TMLF12 smart box
– Use with X431 Key Remote Maker support to Read Transponder, Generate Transponder, Detect Frequency, Detect Ignition switch coil signal, Generate Remote (Launch X431 remote), and Unlock Toyota smart key, etc functions.

Launch X431 G-3 Core Functions:
Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
Supports the BMW CAS4/ CAS4+ module replacement.
Supports the ECU cloning and replacement for BMW Siemens engines.
Supports ECU replacement for the fourth-generation of VW/AUDI engine;
Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
Erase the password for Mercedes-Benz engine and gearbox within 3S.11.
Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

What is the difference of Launch X-PROG3 and X431 Key Programmer?

Launch X431 Key Programmer can support to Read Transponder, Generate Transponder, Detect Frequency, Detect Ignition switch coil signal, Generate Remote (Launch X431 remote), and Unlock Toyota smart key, etc functions.

Launch X-PROG 3 diagnostic function supports key programming, engine and gearbox replacement for various of vehicles, you can retrieve ECU information, read, erase, and write in for a range of chips.
Compatible with X-431 series Launch Tablets, X-PROG 3 enables IMMO type identification, Remote control matching, Key chip reading & matching, key password reading and IMMO component replacement.

In summary:

Both of X431 Key Programmer and X-PROG3 can not use standalone, needs to use together with X431 series device.

But X431 Key Programmer is remote maker indeed, not immo programming tool. If you want to do immo programming to add new key, then add IMMO license for your X431 device with X-PROG3.
Or use with IMMO Plus, IMMO Elite Launch professional key programmer.

X-PROG3 is good tool to work with X431 series to do immo programming. But x431 key programmer is tool for remote.

Launch X-prog3 compatible keys:
1. Original Keys (OEM keys)
2. Launch dedicated universal remote keys
3. Xhorse Autel Keydiy universal keys (generated by the corresponding remote makers.)

Launch GIII X-Prog 3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/ writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated. To check detail X-PROG3 Immobilizer key programming list, check list on the official website.

• Read/write for BMW CAS4+ and FEM chips
• Reading and writing car key chip
• Read for BMW engine ISN code
• Read/write EEPROM MCU….

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: PRO ELITE/ PROS ELITE, X-431 V, X-431 V+, X-431 PAD V, X-431 PAD VII, X431 PRO5, X431 PRO3S+ V5.0, X431 Pro3 Apex, Immo PAD, Immo Pro, Immo Plus, Immo Elite, X-DIAG Pro3 etc.
5. Reads & writes most Engine/ Gearbox ECUs without disassembling the shell

Launch GIII X-Prog 3 Advantages:

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

Supported Brands:
Supported brands: VW, Audi, Skoda, Seat, BMW, Mercedes-Benz, Mini and more continue to be updated.
Supported models: 60+ brands in America, Europe and Asia. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc. More models and systems continue to be updated.

Supported Systems:
Engine system, automatic transmission, instrument system, CAS, body system, lock system…

Launch X431 G-3 Update Notice:

V11.00
1)Added the vehicle mode for the VW IMMO software.
2) Optimized the anti-theft system automatic identification function for the VW anti-theft software

V10.95 (Feb 28th, 2024)

1) Added a total of 48 RH850_encrypted single-chip machine read and write functions,
including R7F701008, R7F701011, R7F701016, R7F701021, R7F701OO9, R7F701012, R7F701017, R7F701022, R7F701026, R7F701002, R7F701010, R7F701013, R7R01018, R7F701023, R7F701027, R7F701014, R7F701019, R7F701024, R7F701028, R7F701032, R7F701040, R7F701042, R7F701044, R7F701046. R7F701050, R7F701003, R7F701015, R7F701020,R7F701025, R7F701029, R7F701033, R7F701041, R7F701043, R7F701045, R7F701047, R7F701051, R7F701030,R7F701034, R7F701048, R7F701052, R7F701054, R7F701056, R7F701006, R7F701007, R7F701049, R7F701053

2). Add a total of 13 VW IMMO MQB instrument read-out functions, including D70F3524, D70F3525_V1, D70F3525_V2, D70F3525_V3, D70F3525_V4, D70F3526_V1, D70F3526_V2, D70F3526_V3, D70F3526_V4, D70F3529, D70F3532_V1, D70F3532_V2, D70F3537

3). Added OBD pre-process function for BMW FEM/BDC immo system.

New Software Update V10.80

1. Added the key learning and instrument replacement functions for Johnson Control MQB instruments (including chips A2C81589600, A2C81589700, D70F3526, and D70F3529).
2. Added the key learning, all keys lost, and instrument replacement functions for Johnson control instruments as of year 2014
3. Added the instrument cloning function for VDO NEC 35XX MQB instruments (including chips A2C81 589600, A2C81 589700, D70F3526 and D70F3529)
4. Added the functions “All Keys Lost” and instrument replacement for the fourth-generation 35XX instruments.

Jan. 2024.
Adds MQB calculator. Obtain sync data for free.
Need
Instrument panel CS code 16 bytes
Ecu 16 bytes CS code
Tcu 16 bytes CS code
ELV 16 bytes CS (if present)

April 2023
1. Add CAS2, CAS3/ CAS3+ IMMO system file generated key function, supported to acquire EEPROM after CAS module read and generate dealer key using EEPROM file
2.FRM module replacement, add FRM module data function, supported to download FRM module data with internet connection.
3. Adds OBD preprocessing function for BMW BDC IMMO system (program BMW BDC key via OBD)

How To Update Launch X431 G3 Software?

The Launch X431 GIII Software Update function keeps your diagnostic software & app up-to-date, you can also use it to customize your frequently used software. As a powerful chip reading and writing device, it’s compatible with most X431 series tablets like X-431 V+ V5.0, X-431 PAD V, X-431 PAD VII, X431 PRO5, etc.

*X-PROG3 will connect PAD VII/PAD V/Pro5 and IMMO series (IMMO Pro/IMMO Elite/IMMO Plus) via USB, for other X431 tablets, only Bluetooth or WiFi connection.
*To clone ECU or TCU with X-PROG3, you need PAD series or IMMO tablet series tools. X431 V/V+/Pros v1.0 with X-PROG3 cannot do ECU/TCU cloning. 

1. On the main diagnostic screen, tap “Software Update” to enter the update center. Check the software you want to upgrade, and then tap “Update”.

2. Once download is completed, the software packages will be installed automatically.

3. You will see a dialogue box BELOW once the installation is completed.

Note:

• You may stop the process by tapping “Stop”, and tap “Continue” to resume the process later.
• In case of network connection failure, tap “Retry”.

For more support lists, please view Launch X431 X-PROG3 ECU MCU and EEPROM List
X-prog3 ECU TCU Clone Function Only with high-end tablets (PAD5, PAD 7, PRO5, IMMO PLUS etc)

Supported ECU MCU List: 
(Support more than 1000 models, keep updating)

Support EEPROM List:
(Support more than 1000 models, keep updating)

How to Use X-PROG3 to Read and Write Data?

• Method 1: Directly connect to OBD16 for key matching, data reading and writing, etc
• Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
• Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.

Connection method 1: Directly connect to OBD16 for key matching, data reading, and writing, etc

Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host

Connection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.

Two Years Update Service for Launch X431 IMMO Activation (LAUNCH IMMO Function Authorization) on PAD VII/ PAD V (PAD V ELITE)/ PRO5/ PRO ELITE etc…

Highlights:

1. IMMO Function Activation For 2 Years, More cost-effective
2. No real shipping. Please provide the serial number to us to confirm and activate the license.
3. Compatible with X431 Pros Star, Pros Elite, PRO ELITE, PROS V5.0, PRO DYNO, PRO TT, Pro3S+ V5.0, Pro3 V5.0 (V+ V5.0), PRO3 ACE,  PRO3 APEX, PRO3S+ ELITE(PRO3 V+ ELITE), LAUNCH PRO5, PAD II, PAD V, PAD VII, PAD V (PAD V ELITE), PAD VII ELITE
This will expand the anti-theft function just like IMMO PLUS, which more cost-effective upgrades service to help every auto mechanic, DIYer, etc. expand your business!!

When Did You Need To Add Launch X431 IMMO Function ?

• Launch X431 PAD or Pro with X-prog3 has less immo function than X431 IMMO Plus or IMMO Elite  IMMO versions. The IMMO specific versions have a higher level of IMMO software but the non IMMO versions (X431 PAD VII/ PRO5/ PAD V/ PRO TT 5.0+ x-prog3) have more PROGRAMMING Software.
• X431 PAD VII/ PRO5/ PAD V/ PRO TT 5.0 + X-prog3 will program keys for German brand only, such as BMW, Mercedes Benz, VW, AUDI, Porsche, to program immobilizer key for other brands GM, Nissan, Honda, Ford, PSA, Renault, Chrysler. Toyota, Kia, Hyundai etc users are allowed to activate the IMMO software package license to the device. So you don’t need to buy a separate IMMO tablet.
• After activation, X431 PAD VII/ PRO5/ PAD V/ PRO TT 5.0 will have the same immobilizer function as X431 IMMO Plus or IMMO Elite.
• For example, if need to use VAG IMMO4 key programming function and everything is up to date, but X431 (with x-prog3) says ‘Download or Update IMMO software package’ , in this case you need to activate immo software license to the device.

Launch X-431 IMMO PLUS & IMMO Elite Key Programming Main Functions

• All Key lost for Audi and Volkswagen.
• [Variant coding/Offline Programming] : IMMO PLUS key programmer supports Benz Variant Coding, VW Long Coding, Ford/Mazda PMI.
• [Anti-Theft IMMO Function] : For Mercedes-Benz, BMW, Audi, Volkswagen and Porsche Read PIN; Key Generation, Key Learning, Remote Learning, Key Matching, IMMO ECU Reset/ Adaption, IMMO Data Backup/ Restore, Unlock Used Radio, etc.
• [Advance Programming Functions] Read PIN/CS, Add/Delete key fobs, All keys lost, Reset/Code/Backup ECU, Replace Module (Compatible with Bosch/Continental/Siemens/Delco brands), Read/Delete Data, Read & Write EEPROM/MCU Chip, Read/Write EEPROM and FLASH of ENG ECU and TCM ECU, Read/Write MC9S12 Encryption Chip, Remote learning, etc.
• [IMMO Functions & Key Programmer] As a professional IMMO programmer, Launch IMMO Plus can help you: Read PIN/CS, Reset/Code/Backup/Clone IMMO ECU, Replace/Clone Module (Compatible with Bosch/Continental/Siemens/Delco brands), Read/Delete IMMO Data, Read & Write EEPROM/MCU Chip, Read/Write EEPROM and FLASH of ENG ECU and TCM ECU, Read/Write MC9S12 Encryption Chip, Add/Delete a Key Fob, All Keys Lost, Key generation, Key learning, Remote learning, etc. 🔯Functions above vary by cars.
• [ECU Module Clone] : Cover Engine/Gearbox ECU Clone for 5000+ models. Easily replace the new/used modules without complex & tedious operations.
• [Key Programmer]  Key Programmer(Package doesn’t include), Identify car key chips and generate various types of chip models from super remotes, read the remote control frequency of car keys, and generate remote control devices for different car models from various types of super remotes. (PS: Need extra purchase X431 Key Pr0grammer & 4 Keys Set)
• NEW!  with integrated mqb2 calculator (get MQB sync data for free)
• NEW! Update VAG MQB NEC35XX add key and all keys lost
• NEW! Supports VW Audi IMMO4 IMMO5 MQB/MLB gearbox module replacement 
• NEW! Adds V-A-G MQB RH850/V850 R7F7014xx 5A key programming

PLEASE Note:

1. After placing your order, please let us know the serial number of your device and we will open it for you within three working days, no extra card is needed, saving you all the trouble!
2. No need for Shipping, please pass us the serial number of your device.
3. Need to be used with Launch GIII X-Prog 3
4. LAUNCH official regulations: The first-time activation of IMMO software authorization does not support one-year service. You must purchase a two-year upgrade service. After the two-year upgrade expires, if you need to renew, you can choose to activate the service for one or two years.

How to activate IMMO Software License?

1. For the first activation, you must purchase two-year upgrade service.
*After two years software license expires, renew it with any type of license above.

2. Provide the serial number of your Launch tool to us to confirm and activate the license. It will be activated within 2 days.

3. After activation, enter the Software Update function on the device menu to update the IMMO software package. Then the Launch tool will have the same immobilizer function as the X-431 IMMO Plus or X-431 IMMO Elite.

After activating IMMO software package, your PAD VII or PADV will have the following IMMOBILIZER software.
FYI: To use remote/transponder cloning/generation functions, you should have Launch X431 key programmer add-on modules.

Service for Launch X431 IMMO Activation Software list:

• Anti-theft matching instrument overseas online configuration (full-featured) Software List

1 full set x Launch X-PROG 3
2 Years IMMO Function Activation Service(Do Online,no need ship）

Launch X431 Key Programmer Remote Maker

NOTE: If you try to update key programming software and firmware on Launch X431 IMMO Plus/ Elite/ PAD V/ PAD VII, you must connect this key programmer with tablet, otherwise it will give error device no response.
This kit is designed to avoid such problems below.

Currently, the Launch X431 key programmer can be used with the:

• LAUNCH X431 IMMO ELITE key programmer
• LAUNCH X431 IMMO PLUS key programmer
• LAUNCH X431 PAD Ⅶ Elite
• LAUNCH X431 PAD Ⅴ Elite
• LAUNCH X431 PRO3S 5.0
• PRO ELITE, PROS ELITE, Pro3 APEX, Pro3 ACE and more to come.

NOTE: If you try to update key programming software and firmware on Launch X431 IMMO Plus/ Elite/ PAD V/ PAD VII, you must connect this key programmer with tablet, otherwise it will give error device no response.

Function:

• Read Transponder
• Generate Transponder
• Detect Frequency
• Detect Ignition switch coil signal
• Generate Remote (Launch X431 remote)
• Set type of super chip
• Set type of wireless remote
• Unlock Toyota smart key
• Compatible with Launch super chip
• etc…

With is IMMO Activation software(IMMO Function Authorization), your item: PAD VII, PAD V, PRO5 will expand the anti-theft function just like IMMO PLUS, which more cost-effective upgrades service to help every auto mechanic, DIYer, etc. expand your business!!

Note:

1. After placing your order, please let us know the serial number of your device and we will open it for you within three working days, no extra card is needed, saving you all the trouble!
2. No need Shipping, please pass us serial number of your device.
3. Need to be used with Launch GIII X-Prog 3
4. The support model only have PAD VII, PAD V, PRO5 temproatily, but we’ll be opening more supported device models in the foreseeable future.
5. The first-time activation of IMMO software authorization does not support one-year service. You must purchase a two-year upgrade service. After the two-year upgrade expires, if you need to renew, you can choose to activate the service for two years.

Service for Launch X431 IMMO Activation Software list:

• Anti-theft matching instrument overseas online configuration (full-featured) Software List

Launch X431 GIII X-PROG 3 Immobilizer and Key Programmer Tool is a chip reading device capable of EEPROM reading and writing as well as offers IMMO functionality, key programming, and other advanced features for North America, Asian, and European vehicle. Additionally, the X-PROG 3 is compatible to work with Launch scan tools to perform key and chip programming, such as the X-431 V, X-431 V , X-431 Pad V, and more models.

Launch GIII X-Prog 3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/ writing EEPROM, on-board MCU and BMW CAS4 /FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.

• Read/write for BMW CAS4 and FEM chips
• Reading and writing car key chip
• Read for BMW engine ISN code
• Read/write EEPROM MCU….

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: X431 V, X431 V , X431 ProS, X431 PRO GT, X431 PRO V4.0, X431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/ Gearbox ECUs without disassembling the shell

Launch X431 IMMO Key Programmer Remote Maker with Super Chip and 4 Sets of Smart Keys is used to identify car key chips and generate various types of chip models from super remotes, read the remote control frequency of car keys, and generate remote control devices for different car models from various types of super remotes.

Currently, the Launch X431 key programmer can be used with the:

• LAUNCH X431 IMMO ELITE key programmer
• LAUNCH X431 IMMO PLUS (It’s an essential device for IMMO PLUS firmware upgrades)
• LAUNCH X431 PAD Ⅶ
• LAUNCH X431 PAD Ⅴ and more to come.

Function:

• Read Transponder
• Generate Transponder
• Detect Frequency
• Detect Ignition switch coil signal
• Generate Remote (Launch X431 remote)
• Set type of super chip
• Set type of wireless remote
• Unlock Toyota smart key
• Compatible with Launch super chip
• etc…

Functions of super chips:

• Support the conversion of most car model chip types, and support separate matching to achieve vehicle startup.
• Support chips of the 8A, 8C, 8E, 4C, 4D, 4E, 48, 7935, 7936, 7938, 7939, 11/12/13 types.

Introduction of 4 smart keys:

Product Name	Picture	Usage Scenario	Function
LS4-NISN-01		LS intelligent key is only compatible with vehicle models equipped with the Kessy system, its functions include keyless starting and door edge sensing.	1.Wireless programming 2. Equipped with anti-theft chip 3. Uses the button cell 2032 4. Circuit board with a 2-year warranty 5. Repeatable writing 6. Batteries need to be installed while generating 7. Supports vehicles with 46, 47, MQB48, MQB49, 4A chips
LN3-PUGOT-01		Certain chips in LN remote can’t generate all vehicle models, it’s needed to check whether the type of chip can support the vehicle model, the chip is integrated into the remote.	1．Wireless programming 2．Equipped with anti-theft chip 3．Uses the button cell 2032 4．Circuit board with a 2-year warranty 5．Repeatable writing 6．Batteries need to be installed while generating 7．Supports vehicles with 11, 12, 13, 7936, 7937, 7947, 7946 chips
LK3-VOLWG-01		LK remote is applied in the situations where the remote needs to be matched but the chip is not needed, or it can also be used with super chip.	1．Wiring programming 2．Not equipped with an anti-theft chip, needs to be used with an anti-theft chip 3．Uses a button cell 2032 4．Circuit board with a 2-year warranty 5．Repeatable writing 6．Batteries cannot be installed while generating
LE4-FRD-01		LE remote contains chip and remote, the multimode chip can generate most of the vehicle models and cover the majority of them.	1．Wireless programming 2．Equipped with a multimode chip 3．Uses a button cell 2032 4．Circuit board with a 2-year warranty 5．Repeatable writing 6．Batteries need to be installed while generating

Package List:

1pc x Launch X-PROG 3
1pc x Power adaptor
1pc x Main diagnostic cable
1pc x The fourth-generation data acquisition cable
1pc x The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
1pc x BENCH mode cable
1pc x MCU converter V1
1pc x MCU converter V2
1pc x MCU cable with multiple leads
1pc x EEPROM chip adaptor
1pc x Benz infrared analog acquisition key
1pc x MCU cable with multiple leads
1pc x EEPROM converter
1pc x User Manual

1pc x Launch X431 Key Programmer
1pc x Super Chip
4pcs x Smart Keys
1pc x Type-C to USB A Converter

LAUNCH X431 IMMO PLUS key programmer is a new generation of 8-inch automobile special IMMO matching tool with high configuration and super performance. The host is developed based on the Android 10.0 open system, adopts a 2.0Ghz 4-core high-efficiency processor, 4GBRAM 64GBROM large storage, and is equipped with a high-endurance battery, which make the diagnosis faster, more stable and more durable.

X431 IMMO PLUS integrates powerful IMMO matching, IMMO programming, full-model system-wide diagnosis with plus functions and special functions. It is the best choice for intelligent maintenance of the IMMO matching tool in repair shops.

Launch X431 IMMO Plus Highlights:

1. IMMO Anti-theft Functions: IMMO PLUS LAUNCH scanner can read the immobilizer PIN and backup the key information for later reset/relearn. Include Read PIN; Key De-lete/Add/All Lost; Key Learning; Module Data Wiping; Module Replacement, IMMO E.CU Reset, etc.
2. Key Programming: Working with X431 PROG3 key programming tool, LAUNCH X431 IMMO PLUS serves 99% of coverage and provides Engine/Gearbox E.CU Module Cloning & Replacement; Remote Matching; Key Generation; Key Learning; Read/Write Key EEPROM, MCU, Engine, Immobilizer; Backup & Restore Engine E.CU Programming Data, etc.
3. ECU Coding: Solving some E.CU-related issues and allowing you to personalize your vehicle functions as preference need.
4. 39 Maintenance Functions: IMMO PLUS scanner not only configure comprehensive IMMO functions but also integrates common reset functions for a full range of diagnostics.
5. All-system Diagnostics: IMMO PLUS scans all the vehicle control modules and finds out all the DTCs to help you to know what’s wrong with the car.
6. Bi-directional Control: An essential feature for quickly locating vehicle problems and saving your time.
7. VAG Guided Functions: Offer step-by-step instructions and guide technicians to do fast repairs.
8. CAN FD Protocol: With the assistance of new communication standards, LAUNCH IMMO PLUS auto scanner enables much higher data rates & faster diagnostic speed than ever.
9. AutoAuth for FCA SGW: Use the latest software update function AutoAuth to provide diagnosis, active testing, etc., making the diagnostics more sE.CUre.Applicable to FCA vehicles equipped with a sE.CUrity gateway module (SGW) in 2017 and later.
10. X-PROG 3 Key Programming Tool: Compatible with X-PROG 3 enables reading and writing EEPROM, generating special keys, anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.
11. 2 Years Free Update: Provides 2 Years free update, One-Touch update via WiFi to enjoy more functions, get wider available vehicle coverage, add more languages, and improve the performance.
12. 99% of Vehicle Coverage: No IP limitation and offering FCA SGW vehicle access.
13. 24 Language Support, No Language Barrier: Italian, English, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian, Romanian, Serbian, Finnish, Swedish, Czech, Chinese Simplified, Chinese Traditional

Advantages:

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for fifth-generation Audi (0AW/0B5) gearboxs.
4. Supports reading, writing & cloning of the ECU for fourth-generation VW UDS engines.
5. Supports BMW E chassis 8HP gearbox ECU program wiping.
6. Support Mercedes(Engine, Gearbox, EIS) and BMW(Gearbox) ECU IMMO data erase.
7. Supports 170 Bosch, 10 Siemens engine ECU and 18 gearbox ECU BENCH mode clone.

– Bosch engine ECU: ME17，MED17，EDC17，MEVD17, etc.
– Siemens engine ECU: BMW(MSV90, MSD87, MSD85,MSD81, MSD80), Mercedes(SIM271DE2.0,SIM271KE2.0), VW/Audi(SIMOS8.6x,SIMOS8.5x,SIMOS8.4x), etc.
– Gearbox ECU: DQ200-MQB, DQ250XX, DL501 Gen1,VL381,VGS2- FCVT,VGS-FDCT,DQ400E,DL501 Gen2,DL382-7F,VGS2-FDCT,9G_Tronic,DQ380,DQ381, DQ500,AL551,AL450,AL552,AL951,8HPXX, etc.

Work With X-PROG 3 For Further Extended Programming Capacibility

In order to get a new key, an experienced lo-cksmith together with LAUNCH IMMO PLUS programming tool can offer programming services chips/remote key fobs/transponder to perfectly match the settings of your car. LAUNCH IMMO PLUS programmer also has access to manufacturer’s pin codes that 100% meet the preset specifications set by the manufacturer. Especially working with the X-PROG3 Immobilizer & Key Programmer, LAUNCH IMMO PLUS enables key chip reading & matching, key generation, ECU clone, etc., to be easily and effectively.
Advantages of PROG 3 Programmer Brings for LAUNCH IMMO Key Programming Tool:

• Engine ECU Module Clone & Replacement ( for 5000 Models)
• Gearbox ECU Module Clone & Replacement ( for 5000 Models)
• Remote Control Matching / Key Generation / Key Learning
• Read/Write Key EEPROM, MCU, Engine, Immobilizer
• Backup & Restore Bosch/Siemens Engine ECU Programming Data
• VW & Au-di Key Learning/All Lost
• 5th-Gen. Au-di (0AW/0B5) Gearbox ECU Replacement
• 5th-Gen. VW UDS engine ECU Reading, Writing & Clone
• Mercedes-Benz Key Adding/All Lost, Mercedes-Benz IMMO ECU Data Wiping, Mercedes-Benz Infrared Key Reading/Writing
• BMW Key Adding/All Lost; ECU Replacement
• BMW E chassis 8HP Gearbox ECU Data Wiping
• Porsche Key Adding/All Lost; ECU Replacement
• Read BMW Engine INS Code

View more >>>
Launch X431 MCU3 Adapter for X-PROG3 GIII Work on Mercedes Benz All Keys Lost and ECU TCU Reading

To program Mercedes all keys lost with X431 V, X431 V , Pro5, Pros, Pro3S, X431 PAD V, PAD VII and X-PROG3 GIII, you will need to connect the MCU3 adapter to X-PROG3 correctly.

Adapter board code: 307140131
Equipment configuration: non-standard accessories, optional.

Applications and advantages of the new MCU3 adapter:

-ADAS Advanced Driving Assist System
-Audi VW MQB gearbox replacement
-BMW continental msv90 engine ecu replacement and cloning
-Peugeot Key Programming
-Mercedes Benz transmission deleted and operating instructions vgs nag2 vgs2 nag2 and vgs3 nag2
-Mercedes Benz w164 2009 Key Programming
-Volkswagen Audi 5th generation engine reading engine data via direct connection and online programming and coding
-For BMW E chassis 8hp EGS deleted
-BMW 8hp chassis F and G delete function
-Key programming cas4/cas4 all keys lost and adding keys
-Programming cas1 cas2 cas3 cas3 lost keys and add key
-CAS4 immobilizer module replacement
-Replacement of Volkswagen Audi engine and reading data med17 and edc17
-Mercedes Benz med9.7 ecu deleted
-Volkswagen Audi Replacement 4th Generation Instrument Replacement
-Engine replacement for Volkswagen Audi MED17.5.22
-Programming of lost keys and adding key Porsche Cayenne 2011 2017
-Cloning and virginization e39 ac delco
-Power shift cloning and virginization
-Nissan ecu and Tcm conversion and virgin ecu programming and calibrations
-Special features in Chrysler and registration at autoauth FCA sgw
-Special features in GM and Ford

View More >>>

LAUNCH X431 Immobilizer Programmer Simulate Key Support X-431 IMMO ELITE / IMMO PLUS/ IMMO Pro

Launch X431 smart key simulator is designed to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip. It can also simulate the vehicle key chip. Currently, it supports to simulate the Toyota smart key chip and more key chip types will be supported with subsequent upgrades.

Prodct Functions:

Support all keys lost for Toyota, BYD and other models

Pakcage List:

1set full package Launch X431 IMMO Plus
1set full package MCU3 Adapter
1set full package X431 Simulator SI-KEY

Launch X431 IMMO Key Programmer Remote Maker with Super Chip and 4 Sets of Smart Keys is used to identify car key chips and generate various types of chip models from super remotes, read the remote control frequency of car keys, and generate remote control devices for different car models from various types of super remotes. With the extra 10pcs Launch Super Chip, it has a more stronger ability to be converted into a wide variety of automotive transponder chips.

Currently, the Launch X431 key programmer can be used with the:

• LAUNCH X431 IMMO ELITE key programmer
• LAUNCH X431 IMMO PLUS (It’s an essential device for IMMO PLUS firmware upgrades)
• LAUNCH X431 PAD Ⅶ
• LAUNCH X431 PAD Ⅴ and more to come.

Launch X431 IMMO Key Programmer Remote Maker with Super Chip and 4 Sets of Smart Keys Function:

• Read Transponder
• Generate Transponder
• Detect Frequency
• Detect Ignition switch coil signal
• Generate Remote (Launch X431 remote)
• Set type of super chip
• Set type of wireless remote
• Unlock Toyota smart key
• Compatible with Launch super chip
• etc…

Functions of super chips:

• Support the conversion of most car model chip types, and support separate matching to achieve vehicle startup.
• Support chips of the 8A, 8C, 8E, 4C, 4D, 4E, 48, 7935, 7936, 7938, 7939, 11/12/13 types.

Usage Scenario:
Method of using super chips

1. Enter the menu [Set type of super chip] to generate.

2. Select the corresponding key chip type and insert the super chip into the anti-theft induction coil.

3. Once successfully generated, it can be used.

Key programmer + key * 4 set includes: key programmer, USB to Type C, LS Nissan (smart card, 4 buttons) -01, LN Peugeot DS (folding 3 buttons) -01, LE Volkswagen super remote (folding 3 buttons) -01, LE Ford super remote (folding 4 buttons) -01

Key programmer: Identify car key chips and generate various types of chip models from super remotes, read the remote control frequency of car keys, and generate remote control devices for different car models from various types of super remotes.
USB to TYPEC connector: device to key programmer

LS Nissan (smart card, 4 buttons) -01, LN Peugeot DS (folding 3 buttons) -01, LE Volkswagen super remote (folding 3 buttons) -01, LE Ford super remote (folding 4 buttons) -01 super remote: One click start smart key models and use LS series Nissan super remotes to generate corresponding keys. For car models with electronic chip keys or the 11/12/13/7936/7937/7947/7946 chips, use the LN series DS super remote. For models without electronic chip keys or models 46, 48, 4D/70, 83, 8A/H, G, 4E, 11/12/13/C, 42, 33, 47, 8C, and 8C, use the LE series Volkswagen and Ford super remotes.

Method of using the LE Volkswagen and LE Ford super remotes: 

1. Enter the [Vehicle Remote] menu and select the corresponding available super remote to generate.

2. Select the corresponding key and place the super remote key in the key programmer to generate.

3. After the remote control is successfully generated, enter the [Set type of super chip] menu to generate the corresponding key chip.

Method of using LS Nissan super remote: 

1. Enter the [Vehicle Remote] menu and select the corresponding smart key model to generate.

2. Place the smart remote key in the key programmer to generate.

Method of using LN Peugeot DS super remote: 

1. Enter the [Vehicle Remote] menu and select the corresponding electronic key model to generate.

2. Place the electronic remote key in the key programmer to generate.

3. For car models without electronic keys, enter [Set type of wireless remote] to generate the corresponding key.

Statement: The content of this document is copyrighted by Shenzhen Launch Tech Co., Ltd., and no individual or organization may quote or reprint it without consent.

Product Specifications of Launch X431 Key Programmer:   

Product size: 80*40*11.2mm
Working voltage: 5V
Operating temperature: 0-50°C
Communication interface: USB
Low-frequency communication interface: 125K low-frequency transceiver
High-frequency communication interface: support 13.56M high-frequency transceiver, support 3000M-500M high-frequency signal frequency measurement

Introduction of 4 smart keys:

Product Name	Picture	Usage Scenario	Function
LS4-NISN-01		LS intelligent key is only compatible with vehicle models equipped with the Kessy system, its functions include keyless starting and door edge sensing.	1.Wireless programming 2. Equipped with anti-theft chip 3. Uses the button cell 2032 4. Circuit board with a 2-year warranty 5. Repeatable writing 6. Batteries need to be installed while generating 7. Supports vehicles with 46, 47, MQB48, MQB49, 4A chips
LN3-PUGOT-01		Certain chips in LN remote can’t generate all vehicle models, it’s needed to check whether the type of chip can support the vehicle model, the chip is integrated into the remote.	1．Wireless programming 2．Equipped with anti-theft chip 3．Uses the button cell 2032 4．Circuit board with a 2-year warranty 5．Repeatable writing 6．Batteries need to be installed while generating 7．Supports vehicles with 11, 12, 13, 7936, 7937, 7947, 7946 chips
LE3-VOLWG-01		LE remote contains chip and remote, the multimode chip can generate most of the vehicle models and cover the majority of them.	1．Wireless programming 2．Equipped with a multimode chip 3．Uses a button cell 2032 4．Circuit board with a 2-year warranty 5．Repeatable writing 6．Batteries need to be installed while generating
LE4-FRD-01		LE remote contains chip and remote, the multimode chip can generate most of the vehicle models and cover the majority of them.	1．Wireless programming 2．Equipped with a multimode chip 3．Uses a button cell 2032 4．Circuit board with a 2-year warranty 5．Repeatable writing 6．Batteries need to be installed while generating

Package Includes:

1pc x Launch X431 Key Programmer
1pc x Super Chip
4pcs x Smart Keys
1pc x Type-C to USB A Converter
10pcs x Super Chips

The Launch X431 X-PROG3 gearbox clone adapters kit can save time for customers who use jumper wires to connect to the ECU. They only need to find the corresponding cable and plug it into the corresponding ECU to clone directly.

Compatible device: X-prog3, X431 ECU programmer, PC Adapter for X-prog3

Connection Diagram:

X-prog3 connection

X431 ECU Programmer connection

X prog3 PC Adapter Connection

Launch X431 ECU Module Cloning Device Connectors Package

	Accessory Name	Material code	function	picture
1	X-PROG3 Adapter Cable 1 (DQ200XX)	307110077	Used to connect the DQ200XX gearbox, and available models include VW, Audi, etc.
2	X-PROG3 Adapter Cable 2 (VL381)	307110078	Used to connect the VL381 gearbox, and available models include VW, Audi, etc.
3	X-PROG3 Adapter Cable 3 (DQ380)	307110079	Used to connect the DQ380/DQ381/DQ500 gearbox, and available models include VW, Audi, etc.
4	X-PROG3 Adapter Cable 4 (DQ250)	307110080	Used to connect the DQ250 gearbox, and available models include VW, Audi, etc.
5	X-PROG3 Adapter Cable 5 (DL501)	307110081	Used to connect the DL501XX gearbox, and available models include VW, Audi, Porsche, etc.
6	X-PROG3 Adapter Cable 6 (DL382)	307110082	Used to connect the DL382 gearbox, and available models include VW, Audi, etc.
7	X-PROG3 Adapter Cable 7 (VGS-NAG3)	307110083	Used to connect the VGS-NAG3 gearbox, and available models include Benz, Nissan, etc.
8	X-PROG3 Adapter Cable 8 (VGS2-FDCT/VGS-FDCT)	307110084	Used to connect the VGS-FDCT/VGS2-FDCT gearbox, and available models include Benz, Infiniti, etc.
9	X-PROG3 Adapter Cable 9 (VGS3-NAG2)	307110085	Used to connect the VGS3-NAG2 gearbox, and available models include Benz, etc.
10	X-PROG3 Adapter Cable 10 (8HP_V1(BMW/LR)/8HP_V2/8HP_V3)	307110086	Used to connect the 8HPXX/AL450/AL551/AL552 gearbox, and available models include BMW, Land Rover, Jaguar, Dodge, Alpina, Chrysler, Rolls Royce, Alfa Romeo, Aston Martin, Great Wall, Jeep, Lamborghini, Maserati, Iveco, etc.
11	X-PROG3 Adapter Cable 11 (MPS6)	307110087	Used to connect the MPS6/MPS6_GEN3 gearbox, and available models include Ford, Renault, Chrysler, Dodge, Land Rover, Volvo, etc.
12	X-PROG3 Adapter Cable 12 (DPS6)	307110088	Used to connect the DPS6 gearbox, and available models include Ford, etc.
13	X-PROG3 Adapter Cable Main Line (ML)	307110089	The extension wire of the gearbox harness, with one end connected to the immobilizer programmer and the other end connected to the gearbox harness

The key chip is compatible with chips of most car models for conversion. It can also be matched for vehicle starting.
Supports 8A, 8C, 8E, 4C, 4D, 4E, 48, 7935, 7936, 7938, 7939, 11/12/13

Method of using super chips:

1. Enter the menu [Set type of super chip] to generate.

2. Select the corresponding key chip type and insert the super chip into the anti-theft induction coil.

3. Once successfully generated, it can be used.

Package List:

10pcs x Launch Super chip